We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 12789

4.i1 ISE - A "jc2_ver" tutorial example contains invalid Verilog syntax


Keywords: JC2_VER, Verilog, syntax, wrong, incorrect

Urgency: Standard

General Description:
The JC2_VER tutorial design contains an initial block that is used to define flip-flop power-up states for functional simulation. The initial assignment for the 4-bit Q output bus is incorrectly written as:

q[3:0] = "0000";


This does not cause any functional failure, as the default initial state for all flip-flops is zero. However, the valid Verilog assignment should be:

q[3:0] = 4'b0000;

This problem is fixed in the latest 4.1i Service Pack, available at:
The first service pack containing the fix is 4.1i Service Pack 2.
AR# 12789
日期 08/11/2003
状态 Archive
Type 综合文章