问答 #31857 - 10.1 ChipScope Pro - IBERT - Virtex-5 TXT MGT locations are reported incorrectly
10.1 ChipScope Pro - IBERT - Virtex-5 TXT MGT locations are reported incorrectly
| 问答编号# | 31857 |
| 专题 | SW-ChipScope IBERT |
| 最后更新日期 | 2008-11-07 00:00:00.0 |
| 记录状态 | Active |
| 器件 | - |
| 设计工具 | - |
| IP | - |
| 开发板与电缆 | - |
疑问描述
Keywords: GTX, MGT, transceiver, Bit, error, rate, column
When GTX DUALs are used in an IBERT design in the second MGT column (X1Y*) in the TXT family, the Analyzer console is not reporting the location correctly. The transceiver still works, but the information is wrong. The clock forwarding combo box will not work properly.
解决方案
This issue will be resolved in ChipScope Pro 11.1. There is a patch available targeting ChipScope Pro 10.1 Service Pack 3. The patch files can be downloaded at the following link:ftp://ftp.xilinx.com/pub/swhelp/ise10_updates/31857.zip