问答 #32349 - 11.1 EDK - The ML506 board does not have the PHY interrupt pin connected
11.1 EDK - The ML506 board does not have the PHY interrupt pin connected
| 问答编号# | 32349 |
| 型号 | EDK-BSB |
| 最后更新日期 | 2009-06-11 00:00:00.0 |
| 记录状态 | Active |
| 关键词 | INTC, interrupt, Marvell, EMAC, Ethernet |
疑问描述
Keywords: INTC, interrupt, Marvell, EMAC, Ethernet
Why does the ML506 board not have the PHY interrupt pin connected?
解决方案
This issue will be fixed in 11.2.In the meantime, to work around the problem, uncomment line number 404 in:
C:\Xilinx\11.1\EDK\board\Xilinx\boards\Xilinx_Ml506\data\Xilinx_ML506_v2_2_0.xbd
This problem has been fixed in EDK 11.2, available at:
http://www.xilinx.com/support/download/index.htm