问答 #32459 - 11.3 CORE Generator software - Running "Upgrade and Regenerate" process fails on NT64
11.3 CORE Generator software - Running "Upgrade and Regenerate" process fails on NT64
| 问答编号# | 32459 |
| 专题 | SW-Coregen |
| 最后更新日期 | 2009-09-10 00:00:00.0 |
| 记录状态 | Active |
| 器件 | - |
| 设计工具 | - |
| IP | - |
| 开发板与电缆 | - |
疑问描述
Keywords: multiplier, complex multiplier, cordic, block memory generator, fir compiler, Windows, Tcl, interpreter
The "Upgrade and Regenerate" process (under Current Project Settings) fails with the following error when I run on a Windows NT 64-bit platform:
"Regenerating IP...
ERROR:sim - An error occurred while initializing the Tcl interpreter.
Finished Regenerating.
ERROR:sim:374 - Error found during execution"
解决方案
The Update and Regenerate fails on Windows NT64 in both the CORE Generator software GUI and when run in batch mode (-u -r switches).Since the error occurs during Regeneration, the core version upgrade has completed. You can run the "Regenerate" process (under Current Project Settings) to complete the desired upgrade.
To avoid this error in the first place, you can run the upgrade (-u) and regeneration (-r) separately from the command line.