问答 #32460 - 11.1 Timing Known Issue - "FATAL_ERROR:Timing:bastwoffsetpref.c:679:1.160.14.3.10.1 - Clock arrival time not found"
11.1 Timing Known Issue - "FATAL_ERROR:Timing:bastwoffsetpref.c:679:1.160.14.3.10.1 - Clock arrival time not found"
| 问答编号# | 32460 |
| 型号 | SW-Timing Analyzer/TRCE |
| 最后更新日期 | 2009-04-20 00:00:00.0 |
| 记录状态 | Active |
| 关键词 | rising, falling, offset, out |
疑问描述
Keywords: rising, falling, offset, out
When I have an OFFSET OUT constraint with the RISING or FALLING keywords, the following error occurs:
"FATAL_ERROR:Timing:bastwoffsetpref.c:679:1.160.14.3.10.1 - Clock arrival time
not found for your_clk. Process will terminate. For
technical support on this issue, please open a WebCase with this project
attached at http://www.xilinx.com/support."
How do I work around this issue?
解决方案
This error can occur when MAP removes one of the clocks, or if the clock contains a TIG constraint. To work around this issue, remove the RISING and FALLING keywords.This is a known issue and is scheduled to be fixed in the next major release of the software.