问答 #33111 - LogiCORE IP Ethernet Statistics v3.x and LogiCORE IP Tri-Mode Ethernet MAC v4.x - Error regarding "No objects found matching..." in the example design timing simulation
LogiCORE IP Ethernet Statistics v3.x and LogiCORE IP Tri-Mode Ethernet MAC v4.x - Error regarding "No objects found matching..." in the example design timing simulation
| 问答编号# | 33111 |
| 型号 | IP-DS-Tri-mode Ethernet MAC |
| 最后更新日期 | 2009-09-11 00:00:00.0 |
| 记录状态 | Active |
| 关键词 | host_addr_reg, no objects found matching |
疑问描述
Keywords: host_addr_reg, no objects found matching
Occasionally, an error similiar to the following might occur when running the example design timing simulation:
# ** Error: (vish-4014) No objects found matching '/testbench/dut/host_addr_reg'
解决方案
These errors can be safely ignored.This is not a design issue and the result of the simulation is not affected (simulations pass). This error is due to the fact that the script is attempting to display internal design nets in the wave window. However, signal naming post PAR can vary, and in the failing designs these nets have been assigned alternative names.