问答 #33357 - Spartan-6 FPGA MCB - Port 3 is not supported in read mode when all 6 ports are configured
Spartan-6 FPGA MCB - Port 3 is not supported in read mode when all 6 ports are configured
| 问答编号# | 33357 |
| 型号 | IP-MIG-DDR2 SDRAM |
| 最后更新日期 | 2009-09-04 00:00:00.0 |
| 记录状态 | Active |
| 关键词 | MCB, port, Spartan-6, P3, read, write |
疑问描述
Keywords: MCB, port, Spartan-6, P3, read, write
When using the MCB in the "2 x 32-bit bidirectional and 4 x 32-bit unidirectional" port configuration, port 3 (P3) can only be used in write mode. There is no support for P3 read mode.