问答 #33752 - 11.3 BitGen - The TIMER value setting does not work
11.3 BitGen - The TIMER value setting does not work
| 问答编号# | 33752 |
| 型号 | SW-Bitgen |
| 最后更新日期 | 2009-11-04 00:00:00.0 |
| 记录状态 | Active |
| 关键词 | PN, TIMER_CFG, TIMER_USR, bgn, Virtex-5, Virtex-6, Spartan-6, 11.2, 11.1 |
疑问描述
Keywords: PN, TIMER_CFG, TIMER_USR, bgn, Virtex-5, Virtex-6, Spartan-6, 11.2, 11.1
In the ISE Project Navigator GUI, I specify the watch dog timer value, but I see the timer value in the BIT file remains as default. I cannot even find -g timer_cfg or timer_usr command in the BGN file.
解决方案
To work around this issue, run BitGen command line with the -g timer_cfg:<hex value> or -g timer_usr:<hex value> options.This issue is scheduled to be fixed in BitGen 11.4.