From Project Explorer, select the lab1/Release directory and copy all files inside the sd_card directory to the root of an SD card.
Insert the SD card into the ZC702 and power on the board.
Connect to the board from a serial terminal in the SDx Terminal tab (or connect via
Putty/Teraterm with Baud Rate: 115200, Data
bits: 8, Stop bits: 1, Parity:
None and Flow Control: None). Click the icon to open the settings.
Keep the default settings in the Connect to serial port window and click
OK.
After the board boots up, you can execute the application at the Linux prompt. Type
/mnt/lab1.elf.
icon to open the settings.
