We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 10825

3.1i Virtex-II PAR - "FATAL_ERROR:Route:basrtsanity..." occurs on floorplanned design immediately after placement.


Keywords: basrtsanity, 284, floorplanned

Urgency: Standard

General Description:
Cases have been seen where PAR fails with the following error immediately after placement, but before any routing messages are posted:

FATAL_ERROR:Route:basrtsanity.c:284: - Process will terminate. To resolve this error, please consult the Answers Database and other online resources at http://support.xilinx.com

NOTE: This Answer record only addresses your issue if it involves a Virtex-II design and the failure occurs before any routing messages are posted.


This problem is fixed in the latest 3.1i Service Pack, available at:
The first service pack containing the fix is 3.1i Service Pack 8.
AR# 10825
日期 10/21/2008
状态 Archive
Type 综合文章