UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 10850

1.0 J Drive - How do I determine the length of a device's instruction register (IR)?

描述

General Description:

When using JTAG Programmer or JDRIVE, it is sometimes necessary to know the length of a device's Instruction Register. How do I determine the length of the IR?

解决方案

The easiest way to find the length of a device's Instruction Register is to look in the BSDL file for that device. The IR length is defined in the following line:

attribute INSTRUCTION_LENGTH of [Device] : entity is [length];

For example:

For an XCV100 BG256, this line would read:

attribute INSTRUCTION_LENGTH of XCV100_BG256 : entity is 5;

Some IR lengths for commonly used Xilinx device families:

Virtex/E: IR=5

18Vxx: IR=8

XPLA3: IR=5

AR# 10850
日期 12/15/2012
状态 Active
Type 综合文章
的页面