UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 11588

5.1i Install CD - Can I install ISE 5.1i on Windows NT, even though its not supported?

描述

Keywords: WinNT, unsupported, OS, Windows, install, 5.1i, 5.2i, error, CD

Can I install ISE 5.1i on Windows NT, even though it is not supported?

解决方案

1

The following messages will be seen during installation:

"Setup has detected an existing version of the driver file:
C:\xilinx\ISE5\bin\nt\windrvr.sys in the system directory
C:\winnt\system32\drivers\windrvr.sys"

"Setup has detected an existing version of the driver file:
C:\xilinx\ISE5\bin\nt\XPC4DRVR.SYS in the system directory
C:\winnt\system32\drivers\XPC4DRVR.sys"

These are simply messages stating that these drivers already exist on the machine and can be ignored.

2

"Error: There was an error updating system dll files."

This messages is due to the fact that the installer is not placing DLLs in the winnt/system32
directory since this is an unsupported OS. If the user had 4.2is3, then the necessary DLLS
are already there.

3

The following errors will be seen during installation:

"Error: Failed creating link file."
"Error: failed creating link: C:\WINNT\Profiles\All Users\Desktop\Xilinx My support.lnk to file: http://mysupport.xilinx.com"

These errors refer to a desktop shortcut that will not be installed and therefore can also be safely ignored.
AR# 11588
日期 07/05/2006
状态 Archive
Type 综合文章
的页面