ps before " on signal " (for_INT)" is not valid..."">

UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 11589

12.1 NGDBuild/Constraint - "ERROR:NGD:635 - Specification "OFFSET=IN

描述

The following NGDBuild error occurs:

"ERROR:NGD:635 - Specification "OFFSET=IN <time>ps before <signal_name>" on signal "<problem_signal> (for_INT)" is not valid, because this signal is not connected directly to a pad."

解决方案

The error above is associated with the following constraint:

NET "<problem_signal>*" OFFSET= IN <time>ns before <signal_name>;

NOTE: The "*" indicates that you want to include each bit in the bus on this constraint.

To avoid this error, place parentheses around the "*", as in the following example:

NET "<problem_signal>(*)" OFFSET= IN <time>ns before <signal_name>;

Both of these signal names must be associated with pads.

For more details on timing constraints, please see the Timing Constraints User Guide:http://www.xilinx.com/support/documentation/sw_manuals/xilinx12_1/ug612.pdf

AR# 11589
日期 05/13/2012
状态 Archive
Type 错误信息
的页面