We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 11748

7.1i ISE - If "File -> Save As" is used for a Project Navigator project with an open source file, the copied source file does not open correctly


Keywords: save, project, open, source, remote, directory

Urgency: Standard

General Description:
I open a project source file in Project Navigator and perform the following steps:

1. Click File -> Save Project As.
2. Create a new directory and save the project in it.
3. The project is now open in the new directory, but the ISE Text Editor is still displaying the source file from the original project directory.

However, if I edit the document and then synthesize it, the synthesis does not show the changes.


To avoid this problem, either close all documents before saving in a new directory, or close and reopen the source file.
AR# 11748
日期 12/11/2006
状态 Archive
Type 综合文章