UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 11767

4.1i CORE Generator, Virtex-II Pro, PAR - "ERROR:Pack:12 - The RLOC value of X20Y104 on component N3682 in RPM hset creates a macro that is too large..."

描述

Keywords: PAR, CORE Generator, COREGen, RPM RLOC, hset

Urgency: Standard

General Description:
When I target a Virtex-II Pro design with IP modules from CORE Generator, the following error appears if my core has RLOC or RPM (Relationally Placed Macro):

"ERROR:Pack:12 - The RLOC value of X20Y104 on component N3682 in RPM hset creates a macro that is too large for the device. Use a bigger device."

解决方案

This error occurs because PAR is not able to successfully place the RPM macros in the device.

A possible work-around for this problem is to re-generate the core module without the RPM, and use the cores without the RPM. This work-around may reduce the performance of the core module, but it should make placement of the design easier.
AR# 11767
日期 10/19/2008
状态 Archive
Type 综合文章
的页面