UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 11811

4.1i Install - When installing ISE on a Solaris machine, the CD appears to be blank.

描述

Keywords: Alliance, 3.1i, installation, install, Solaris, 7, 8, 3.1i

Urgency: Standard

General Description:
When I attempt to install the ISE CD on a Solaris machine, the CD appears to have no data on it.

解决方案

This problem has been seen on new Solaris 5.8 machines, as well as some 5.7/2.7 machines with updated OS patches.

Please contact your IT administrator and perform the following steps:

1. Log in as "root."

2. Eject the CD-ROM, and remove it. Push the tray back in.

3. Type: /etc/rc2.d/S92volmgt stop

4. Type: ps -aef | grep vold --- make sure vold is not running; if it is, kill it.

5. Type: cd /cdrom

6. Type: ls -al --- if you see any files there, remove them with the command "rm -rf *".

7. Type: cd /

8. Type: mount -F hsfs -o ro /dev/dsk/cxtxdxsx /cdrom. By default, CD-ROMs are on target 6, so you can use "c0t6d0s0" instead of "cxtxdxsx."

9. Place the CD-ROM back in the drive.

10. Type: ls -al /cdrom -- you should now see the data on the CD.
AR# 11811
日期 10/02/2003
状态 Archive
Type 综合文章
的页面