We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 11831

5.1i Install - ISE issues errors during a CD installation, and Project Navigator does not run on an international language version of Windows


Keywords: ISE, demo, install, CD, Hebrew, Windows, language, international, foreign, Chinese, German

When I try to install the ISE CD on an international language version of Windows 2000 or XP, errors are reported during the installation, and Project Navigator does not launch.


This can occur when you attempt to install a US English version of ISE on an international language versions of Windows. To work around this problem, set the Regional Settings to English (United States), install the software, then restore your original settings. This can be completed by following the steps below:

1. Click the Start button.
2. Go to Settings -> Control Panel.
3. Double-click on "Regional Settings".
4. Set the tab to "English (United States)".
5. Run the CD installation until it is finished.
6. When it asks if you want to reboot now, choose "No".
7. Go back to the Regional Settings as in Step 1, and change them back to the original setting.
8. Reboot.
AR# 11831
日期 03/26/2006
状态 Archive
Type 综合文章