UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 11839

6.1i CORE Generator - BitGen DRC warning: "DesignRules:331 - Blockcheck: Dangling F output. F of comp afifo/BU75/SP is configured, but output is not used."

描述

General Description 

When running the bit stream generation (BitGen) of the Xilinx Implementation tool for a Virtex-II design, a warning message similar to the following might be reported: 

 

"Running DRC. 

WARNING:DesignRules:331 - Blockcheck: Dangling F output. F of comp  

fred/BU75/SP is configured, but output is not used. 

WARNING:DesignRules:331 - Blockcheck: Dangling G output. G of comp  

fred/BU75/SP is configured, but output is not used."

解决方案

If these components are coming from the asynchronous FIFO generated from CORE Generator, these messages can be safely ignored.  

 

These warnings are caused by the RAM16x1D primitives that are used for asynchronous FIFOs. The warnings occur when the SPO output of this primitive is not used. To check for this, search for these components in FPGA Editor, and see if they are configured as dual-port RAM.

AR# 11839
日期 05/14/2014
状态 Archive
Type 综合文章
的页面