AR# 11856

|

Virtex/E - Readback timing information (XAPP 138)

描述

Description: 

The Virtex data sheet and Xilinx Application Note "Virtex FPGA Series Configuration and Readback" (Xilinx XAPP 138) do not specify timing information for readback. What are the CS to high-Z and clock-to-out times for readback?

解决方案

While this information has not been fully characterized, conservative figures are available: 

 

1. CS -> high-Z: 30ns 

 

The CS->high-Z parameter gives the amount of time from the de-assertion of CS to high-Z on the D[0:7] pins. 

 

2. Clock-out: 25ns 

 

Clock-out is the time from a rising clock edge to valid data presented on the D[0:7] pins.

AR# 11856
日期 05/08/2014
状态 Archive
Type 综合文章
People Also Viewed