UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 12084

4.1i Project Navigator - When I open a testbench waveform, an error reports "Unable to open HDL source file <design>.VHF or <design>.VF"

描述

Keywords: VHF, waveform, delete, implemenation, flow

Urgency: Standard

General Description:
When I attempt to open a testbench waveform (.tbw) after running "Delete Implementation Data" or "Switching Design Flows", the following error is reported:

"ERROR - Unable to open HDL source file <design>.VHF or <design>.VF"

解决方案

This error occurs because the HDL model has been deleted.

You can force the HDL model to be regenerated as follows:

- Right-click on "View VHDL/Verilog Functional Model" under "Design Entry Utilities" in Project Navigator.
- Select "Rerun".

This issue was fixed in the 5.1i software release.
AR# 12084
日期 08/11/2003
状态 Archive
Type 综合文章
的页面