General Description:
The port names displayed by the Constraints Editor in "active module" mode are actually those of the port nets, not the ports themselves.
If the net connected to the port from above (i.e., from the top-level wrapper) has a different name than the port, this may cause confusion, particularly if the name is synthesis-generated and has no relation to the original name.
This issue is fixed in the 5.1i software, which is scheduled to be released in September, 2002.
AR# 12135 | |
---|---|
日期 | 01/18/2010 |
状态 | Archive |
Type | 综合文章 |