UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 12216

14.x Timing Analyzer - The Custom Analysis data sheet section does not include the Clock-to-Setup table

描述

Why does the data sheet section not include the Clock-to-Setup table when I perform a Custom Analysis?

解决方案

The Clock-to-Setup table does not appear because the clock path does not go through the net that was selected for inclusion.

If you include the clock net in the selected nets, the Clock-to-Setup table will appear correctly.

AR# 12216
日期 12/15/2012
状态 Active
Type 综合文章
Tools
  • ISE - 10.1
  • ISE Design Suite - 11.1
  • ISE Design Suite - 11.2
  • More
  • ISE Design Suite - 11.3
  • ISE Design Suite - 11.4
  • ISE Design Suite - 11.5
  • ISE Design Suite - 12.1
  • ISE Design Suite - 12.2
  • ISE Design Suite - 12.3
  • ISE Design Suite - 12.4
  • ISE Design Suite - 13
  • ISE Design Suite - 13.1
  • ISE - 8.1i
  • ISE - 8.1i sp1
  • ISE - 8.1i sp2
  • ISE - 8.1i sp3
  • ISE - 8.2i
  • ISE - 8.2i sp1
  • ISE - 8.2i sp2
  • ISE - 8.2i sp3
  • ISE - 9.1i
  • ISE - 9.1i sp1
  • ISE - 9.1i sp2
  • ISE - 9.1i sp3
  • ISE - 9.2i
  • ISE - 9.2i sp1
  • ISE - 9.2i sp2
  • ISE - 9.2i sp3
  • ISE - 9.2i sp4
  • ISE - Legacy
  • ISE Design Suite - 13.2
  • ISE Design Suite - 13.3
  • ISE Design Suite - 13.4
  • ISE Design Suite - 14.1
  • Less
的页面