We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 12242

4.1i Modular Design - "FATAL_ERROR:Place:xvkapfastfitter.c:971:1.28 - TBUFSET containing TBUF..."


Keywords: TBUF, BUFT, 3-state, tristate, buffer, active

Urgency: Hot

General Description:
During active implementation of a module, PAR reports the following error:

"FATAL_ERROR:Place:xvkapfastfitter.c:971:1.28 - TBUFSET containing TBUF
ADIO<15>/PSEUDO_TBUF is partially placed."


This is a known issue that occurs when multiple 3-state buffers (TBUFs) drive the same net, but are part of different modules. Modular Design does not currently allow this configuration. TBUFs driving the same net must ALL be part of the top level/context logic, or part of the SAME module.

The following figure illustrates the correct and incorrect configurations:
Using 3-State Buffers (TBUF) in Modular Design
Using 3-State Buffers (TBUF) in Modular Design
AR# 12242
日期 08/11/2003
状态 Archive
Type 综合文章