We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 12264

5.1i Constraints Editor - Outputs in a 3-state condition are not recognized


General Description:

When I open a design with I/O types, Constraints Editor does not recognize the 3-state outputs. (Additionally, this does not appear in the Ports tab.)


To work around this problem, manually modify the UCF to add the particular constraint that you wish to place on the 3-state I/O port.

This will be fixed in the next major software release (after 5.1i).

AR# 12264
日期 01/18/2010
状态 Archive
Type 综合文章