UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 1227

Template Manager M1/XACT - How to specify options not available in the options menu of Design Manager

Description

Keywords: Template Manager, options, Design Manager

Urgency: Standard

General Description:
If you wish to enable an M1 or XACT 6.0.x option from the GUI-based Design Manager interface and it is not available in the GUI options menu, you may do so from the Template Manager. You may create a custom template that can enable/disable any Xilinx core tools option.

解决方案

1

Using M1 on PC or Workstation:

1. From the Utilities pull-down menu in the Design Manager, select "Template Manager".

2. Select your target Family and the type of template you wish to create.

3. Select the "New" button and give your custom template a name.

4. Select your template from the Template window and press the "Customize" button.

5. Within the Custom Template Dialog Window, enter the program name in the
"Program Name" selection box and specify the desired option in the
"Program Options" selection box.

NOTE: For a listing of all availible tool options, from a DOS or UNIX command line execute the particular program with the
-help switch. For Example : par -help

6. Click on the "Set" button on the Template Custom Options menu for each option specified. Once all of the options are specified, select "OK" and exit the Template Manager by clicking on "Close".

7. When implementing the design, select your newly created template under "Program Option Templates" in the Options dialog box.

2

Using XACT 6.0.X :

1. From the Utilities pull-down menu in the Design Manager,
select Template Manager.

2. Select the New button and give your custom template a name.

3. Select your template from the Template window and press the
customize button.

4. Within the Custom Template Dialog Window is where you can
specify your options. The syntax is <program> <option>.
For Example :

ppr estimate=true
ppr ignore_rlocs=true

**Note: For a listing of all availible tool options, from a DOS
command line execute the particular program with the
-helpall switch. For Example : ppr -helpall

5. Hit the OK button on the Custom Template Dialog window and
exit the Template Manager by clicking the Close button.

6. When implementing the design, select your newly created
template under Program Option Templates in the Options Dialog Box.
AR# 1227
创建日期 08/31/2007
Last Updated 11/07/2002
状态 Archive
Type ??????