We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 12350

4.1i Virtex-II PAR - Placer crashes with the internal error: "Place:basplprcntl.c:2539:1.40 - Cannot place component..."


Keywords: Place:basplprcntl.c:2539:1.40, place, placer, crash, LOC, carry, chain, 3.1i

Urgency: Standard

General Description:
When a LOC constraint is applied to the last slice in a carry chain such that there is not enough room to place the carry chain underneath, the carry chain is made un-placeable, and a placer crash occurs.

In 3.1i, PAR crashes at the beginning of placement right after the initial timing analysis. In 4.1i, the crash occurs, but several error message similar to the following are printed first:

INTERNAL_ERROR:Place:basplprcntl.c:2539:1.40 - Cannot place component i_icpt_nlc/i_dummy_or/i_AND/if_lg_if_lg.gen.gen.1_i_MUXCY_L/O


To avoid this error and crash, remove any LOC constraints that conflict with carry chain placement.

This problem will be fixed in the next major software release after 4.1i.
AR# 12350
日期 10/22/2008
状态 Archive
Type 综合文章