UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 12548

Virtex-II, DCM - Is it possible to increment the phase shift by more than 1/256 step using Variable Phase Shift?

描述

Can I use PSINCDEC to increment the phase shift by more than 1/256 by setting the PHASE_SHIFT value?

Is it possible to increment or decrement the phase shift by more than 1/256 step using Variable Phase Shift?

解决方案

No. To use the PSINCDEC value, the CLKOUT_PHASE_SHIFT attribute must be set to "VARIABLE". In this mode, the PHASE_SHIFT value is used only as the starting point. After this, the clock will shift by 1/256 only. There is no way to increment the phase shift by PHASE_SHIFT/256.

Please see (Xilinx Answer 13824) and (Xilinx Answer 11936) for more information on the DCM phase shift feature.

AR# 12548
日期 12/15/2012
状态 Active
Type 综合文章
的页面