AR# 12619


4.1i Virtex-II PAR - Placer does not report Directed Placer failures.


Keywords: directed, placer, placement, area, groups, range, failed

Urgency: Standard

General Description:
In 3.1i, the placer reports offending AREA_GROUP constraints if the Directed Placer fails (before attempting a "secondary" placement using a different algorithm). In 4.1i, "secondary" placement is attempted without any feedback being given to the customer to report that a constraint has caused a problem. This behavior causes excessive PAR run-time (2+ days with XC2V6000 designs).


This problem is fixed in the latest 4.1i Service Pack, available at:
The first service pack containing the fix is 4.1i Service Pack 2.

This fix will enable Directed Placement failures to be reported under environment variable control:

For PCs:

For Workstations:
setenv XIL_PAR_D_ERROR 1

Another environment variable will cause information to be printed about any macro decomposition that occurs during placement. The
decomposition occurs when an RPM (user or internal) needs to be fitted into the device or area group range.

For PCs:

For Workstations:
AR# 12619
日期 10/23/2008
状态 Archive
Type 综合文章
People Also Viewed