We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 12648

4.1i XST XC9500 - Using a transparent latch with an asynchronous set leads to incorrect implementation


Keywords: XC9500, XST, latch, asynchronous set

Urgency: Standard

General Description:
When using a transparent latch with an asynchronous set, the XST will incorrectly infer the asynchronous set.

Please note: The following only applies to the Xilinx XC9500 family of devices (XC9500/XL/XV).


This is fixed in 4.2i.

To work around this situation in 4.1i, manually instantiate the LDCP component. You may look up the component in the on-line libraries guide to determine port naming. To access the libraries guide, go to http://www.support.xilinx.com/, then select "Software Manuals".

The following is an example of VHDL declaration:

component LDCP
port (Pre : in std_logic; D: in std_logic; G: in std_logic;
CLR : in std_logic; Q: out std_logic);
end component;
AR# 12648
日期 08/05/2003
状态 Archive
Type 综合文章