UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 12747

7.1i XST - Does XST support cross-clock domain analysis?

描述


General Description:

XST does not automatically take inter-clock domains into account during timing optimization. Does XST support cross-clock domain analysis?

解决方案


Yes. To activate cross-clock domain analysis, you must set a switch in XST. This is only supported in command line mode (it is not supported in ISE). You can set this switch via the following option:



-cross_clock_analysis YES



For example:



run -ifn <INPUT_FILE_NAME>.vhd -ifmt VHDL -p xcv50-bg256-6 -ofmt NGC -ofn xst_demo -cross_clock_analysis YES



Where:

"-ifn" is the input file name

"-ifmt" is the input HDL format (Verilog or VHDL)

"-p" is the target part

"-ofmt" is the output format (EDIF or NGC)

"-ofn" is the output file name



This is a GUI option in 10.1 under synthesis properties.
AR# 12747
日期 04/12/2012
状态 Archive
Type 综合文章
的页面