We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 12948

7.0 SYNPLIFY - Problem involving instantiated BUFGMUXs


Keywords: Virtex, Virtex-II, Virtex2, BUFG, BUFGP, BUFGCE, BUFGMUX

Urgency: Standard

General Description:
Synplify 7.0 does not recognize an instantiated BUFGCE as a clock buffer; therefore, Synplify 7.0 will infer a BUFGP instead of an IBUFG for the PAD.

The BUFGP is a macro that will expand into an IBUFG + BUFGMUX (configured as BUFG), resulting in two BUFGMUXs.



VHDL Example:

BUFGMUX instantiation using Synplify:

library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_signed.all;

entity bufgmux_instantiate is
port ( clk_pad : in std_logic;
clk_debug_pad : in std_logic;
normal_mode : in std_logic;
a : in std_logic_vector(15 downto 0);
b : in std_logic_vector(15 downto 0);
p : out std_logic_vector(31 downto 0) );

attribute xc_padtype : string;
attribute xc_padtype of clk_pad: signal is "IBUFG";
attribute xc_padtype of clk_debug_pad: signal is "IBUFG";
-- this attribute forces external clock pad signal to be of type IBUFG instead
-- of BUFGP inferred by default by Synplify

end entity bufgmux_instantiate;

architecture structural of bufgmux_instantiate is

signal clk: std_logic;

component BUFGMUX
port ( O : out std_logic;
I0 : in std_logic;
I1 : in std_logic;
S : in std_logic );
end component;

port map(
O => clk,
I0 => clk_debug_pad,
I1 => clk_pad,
S => normal_mode);

-- other code
process (clk)
if rising_edge(clk) then
p <= a * b;
end if;
end process;

end structural;


Verilog Example

BUFGMUX instantiation using Synplify:

module bufgmux_instantiate (clk_pad, clk_debug_pad, normal_mode, a, b, p);

input clk_pad /* synthesis xc_padtype = "IBUFG" */;
input clk_debug_pad /* synthesis xc_padtype = "IBUFG" */;
input normal_model;
input a;
input b;
output p;

BUFGMUX U1 (.O(clk), .I0(clk_debug_pad), I1(clk_pad), .S(normal_mode));

always @(posedge clk) p <= a * b;

AR# 12948
日期 04/23/2007
状态 Archive
Type 综合文章