UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 1301

XC5200 - Programmable keeper cells are automatically enabled when all buffers are in a 3-state condition

Description

Keywords: keeper, cells, 3-state, tristate

Urgency: Standard

General Description:
In "The Programmable Logic Data Book" (7/96 and 9/96) on page 4-194, in paragraph 2 of column 2, it states:

"Additionally, programmable keeper cells at the periphery can be enabled to retain the last valid logic level on the long
lines when all buffers are in 3-state mode."

Is this correct?

解决方案

This passage can be confusing. The "programmable keeper cells" mentioned in the text are said to be "enabled", which can lead you to believe that you must turn on a switch in the software to activate these cells. This is not the case. Instead, these "programmable keeper cells" are automatically enabled by the software whenever all buffers are in a 3-state condition.
AR# 1301
创建日期 08/31/2007
Last Updated 02/27/2003
状态 Archive
Type ??????