AR# 1317


4.2i Foundation Simulator - Saving simulation probes and I/O signals


Keywords: Foundation, simulation, probe, save, test vector

Urgency: Standard

General Description:
The following procedure will allow you to save probes placed on the schematic, signals added to the Waveform Viewer in the simulator, and stimulators on these signals so that they may be used again for future simulations.


1. Place all desired simulation probes on the schematic using the "SC Probes" toolbar menu or select the signals you wish to view from the Signal --> Add Signals dialog box in Foundation Logic Simulator. Set up any stimulators that will be used every time this design is simulated, such as clocks, constants (0 or 1), or formulas.

2. In the simulator, select File --> Save Waveform. Enter a name to save simulation data and click "OK".

3. To load the signal list and stimulators, select File --> Load Waveform. Select the appropriate .TVE filename and click "OK".
AR# 1317
日期 08/11/2003
状态 Archive
Type 综合文章
People Also Viewed