UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 13303

4.1i ISE - Project Navigator passes the "-xe 0" option to PAR, regardless of the effort level I selected

描述

Keywords: PAR, extra, effort, level, xe, ISE, Project Navigator, algorithm

Urgency: Standard

General Description:
ISE passes the "-xe 0" option to PAR, regardless of the effort level I selected.

解决方案

Project Navigator does not support PAR Extra Effort default and Level 2 settings.

This problem is fixed in the latest Service Pack, available at:
http://support.xilinx.com/support/techsup/sw_updates
The first service pack containing the fix is 4.1i Service Pack 3.

NOTE: PAR provides an Extra Effort mode (-xe 0|1|2) to provide new placer and router algorithms on tough designs. The PAR -xe default is PAR effort level (-ol)-dependent:
- For -ol 1 through 4, the -xe value of 0 (OFF) is the default value.
- For PAR Effort Levels 1 through 4, only -xe 0 is valid, as maximum regular PAR effort should be used before starting the "Extra Effort".
- The PAR -xe default for PAR effort Level 5 is -xe 1. (-xe 2 is only valid for PAR Effort Level 5. It uses more run time, but can improve the design significantly.)
AR# 13303
日期 08/11/2003
状态 Archive
Type 综合文章
的页面