UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 13328

Virtex-II Pro - Power Management of PowerPC in Virtex-II Pro: Is it possible to decrease the clock dynamically?

描述

General Description: 

Power Management of PowerPC in Virtex-II Pro: Is it possible to decrease the clock dynamically?

解决方案

You cannot change or stop the clock to PPC405 while it is operating -- you must put the processor into the wait state first. When the processor is in the wait state, you may do anything you wish to its clock. After the clock is stable again, you can bring the processor out of the wait state by using an interrupt or by resetting the core.  

 

To change the clock on the PLB or any other synchronous bus, you must be sure that none of the masters or slaves connected to that bus have outstanding transactions.

AR# 13328
日期 05/14/2014
状态 Archive
Type 综合文章
的页面