UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 13330

MIcroBlaze - Is the pre-fetch buffer refilled on a branch? If so, how many clocks are needed to get the pipeline full again?

描述

General Description: 

Is the pre-fetch buffer refilled on a branch? If so, how many clocks are needed to get the pipeline full again? 

 

For example, if the pre-fetch buffer and the pipeline are full, and a branch happens, the pipeline and pre-fetch buffer are invalid, correct?

解决方案

It takes one clock cycle to for the pipeline to become full. Generally, the pre-fetch buffer does not add any extra clocks (as compared to a non pre-fetch buffer design). 

 

As indicated above, the pre-fetch buffer does NOT add any extra clock cycles. The pre-fetch buffer is part of the pipeline -- it is better described as a stretch buffer between two pipe stages that can hold 0-16 values.

AR# 13330
日期 05/14/2014
状态 Archive
Type 综合文章
的页面