UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 1347

Data Book - Can Xilinx devices be wave-soldered or immersed in solder?

Description

General Description:

Can Xilinx Devices be wave soldered or immersed in solder? What are the guidelines if the device is to be wave-soldered?

解决方案

Since most Xilinx device packages are manufactured from plastic, it is not suggested to wave-solder the devices, or to immerse them in solder.

If the device is to be wave-soldered, special care must be taken to ensure that the maximum temperature of the package body does not exceed 220 degrees C and that all components are kept in a dry condition. Unless specifically stated for any package type, dry condition implies less than 0.12% moisture by package weight.

Please refer to the "Packages and Thermal Characteristics" section of the Xilinx Programmable Logic Data Book for more information on handling components that are moisture-sensitive.

AR# 1347
创建日期 08/21/2007
Last Updated 12/15/2012
状态 Active
Type 综合文章