UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 13572

Virtex-E/Virtex-II/Pro - Simultaneous Switching Output (SSO) guidelines for LVDS and LVPECL

描述

General Description:

The Simultaneous Switching Output (SSO) guidelines for Virtex-E and Virtex-II omit entries for LVDS and LVPECL. What is the recommended maximum number of SSOs for these signals?

解决方案

(For a detailed discussion about handling SSOs, please see (Xilinx XAPP689): "Managing Ground Bounce in Large FPGAs.")

For SSO guidelines, use these substitutions:

Virtex-E, LVDS: one output pair = one LVTTL 2mA driver with fast slew rate

Virtex-E, LVPECL: one output pair = one LVTTL 24mA driver with fast slew rate

The Virtex-II/Pro LVPECL driver is identical to the Virtex-E driver.

Because the Virtex-II LVDS driver is very balanced, its switching causes a negligible amount of transient current. As a result, SSOs are not a problem. For more information, please see (Xilinx Answer 12629).

The Virtex-E SSO guidelines are provided in the Virtex-E data sheet at:

http://www.xilinx.com/xlnx/xweb/xil_publications_display.jsp?category=/Data+Sheets/FPGA+Device+Families/Virtex-E&iLanguageID=1

Select "Detailed Functional Description" -> "Using SelectI/O" -> "Design Considerations" -> "Simultaneous Switching Guidelines".

The Virtex-II SSO guidelines are provided in the "Virtex-II Platform FPGA User Guide" at:

http://www.xilinx.com/xlnx/xweb/xil_publications_display.jsp?category=/User+Guides/FPGA+Device+Families/Virtex-II/&iLanguageID=1

Select "Design Considerations" -> "Using Single-Ended Select I/O Ultra Resources" -> "Design Considerations" -> "SSO Guidelines".

AR# 13572
日期 12/15/2012
状态 Active
Type 综合文章
的页面