AR# 13636

4.1i XDL - Config string generated by "xdl -ncd2xdl" only lists one route-thru when more may exist.

描述

Keywords: replicate, duplicate, flop, register, FF, sync, asynchronous, XDL, route-thru, routethru

Urgency: Standard

General Description:
When XDL is run with the "-ncd2xdl" switch to generate a netlist description of an NCD, the resulting netlist only contains one route-thru listed in a CLB/Slice configuration string, even in cases where multiple route-thrus existed in the CLB/Slice.

Specifically, this problem was found to affect the accuracy of a Perl script described in (Xilinx Answer 3813), which is used to detect output to output route-thrus in 4K designs.

解决方案

1

This problem is fixed in the latest 4.2i Service Pack, available at:
http://support.xilinx.com/support/techsup/sw_updates.
The first service pack containing the fix is 4.2i Service Pack 1.

2

Alternatively, a patch compatible with 4.1i SP3 is available:

For PCs:
http://www.xilinx.com/txpatches/pub/swhelp/ise4_updates/41i_xdl_pc_13636.zip

For Solaris:
http://www.xilinx.com/txpatches/pub/swhelp/ise4_updates/41i_xdl_sol_13636.tar.gz

This problem will be fixed in the next major software release following 4.1i.
AR# 13636
日期 08/20/2003
状态 Archive
Type 综合文章