UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 14134

4.2i PAR - VCC/GND signals not guided properly in the Partial Reconfiguration assembly phase

描述

Keywords: Partial, Reconfiguration, assembly, VCC, GND, guide

Urgency: Standard

General Description:
During PAR guided assembly in partial reconfiguration, the VCC/GND signals are generated by the router during active module implementation. These signals should be pushed to the completed design during the assembly phase, but are not.

(This is required for Partial Reconfiguration to work correctly in the 4.2i software.)

解决方案

This problem is fixed in the latest 4.2i Service Pack, available at:
http://support.xilinx.com/support/techsup/sw_updates.
The first service pack containing the fix is 4.2i Service Pack 1.
AR# 14134
日期 10/23/2008
状态 Archive
Type 综合文章
的页面