AR# 14193

|

5.1i iMPACT - XC18V01/512/256 SVF programming fails

描述

Urgency: Hot

General Description:

When I create XC18V01/512/256 SVF files with the Operation -> Program menu item and the "Erase before Programming" option, the XC18V01 fails to program. (The XC18V01/512/256 is still blank after I apply the SVF.)

解决方案

This problem is fixed in the latest 5.1i Service Pack, available at:

http://support.xilinx.com/support/techsup/sw_updates
The first service pack containing the fix is 5.1i Service Pack 3.

Alternately, there are two possible ways to work around this problem:

Work-around 1 (preferred):

Generate an SVF file using the following sequence:

1. Operation -> Erase

2. Operation -> Program (Do not select "Erase before programming")

Work-around 2:

Add the following RESET instruction between the Erase CONLOAD and Program ISP-ENABLE instructions:

STATE RESET;

AR# 14193
日期 12/15/2012
状态 Active
Type 综合文章
People Also Viewed