UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 14195

4.2i CORE Generator - When using LFSR v2_0, specifying "Length = 26" causes the GUI to hang

描述

Keywords: COREGen, Linear, Feedback, Shift, Register, COREGen, core, length, LFSR

Urgency: Standard

General Description:
I am using 4.2i CORE Generator Linear Feedback Shift Register v2_0. When I select "LFSR length = 26", the system hangs with 100% CPU usage.
(Rebooting is sometimes needed to kill the process.)

解决方案

The problem does not occur when the LFSR length is between 1-25 or is 27, 28, 29, etc. The crash only occurs when a length of 26 is specified. This problem is currently under investigation.

Meanwhile, please try to use a length that is other than 26.
AR# 14195
日期 10/08/2003
状态 Archive
Type 综合文章
的页面