We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 14210

*Obsolete* 4.2i iMPACT - Attempting to perform an erase operation in File Generation Mode causes "FATAL_ERROR:GuiUtilities:WinApp.c:570"


Keywords: iMPACT, BSDL, BSD erase, FATAL_ERROR, GuiUtilities, Dr.Watson, crash

Urgency: Standard

General Description:
I am attempting to create an SVF or STAPL file in 4.2i iMPACT in the File Generation Mode. If I add a device with a BSDL file assigned (rather than a JEDEC file), the following fatal error is reported if I attempt to perform an erase operation:

"FATAL_ERROR:GuiUtilities:WinApp.c:570: This application has discovered an exception condition from which it cannot recover. Process will terminate."


To work around this problem, assign a JEDEC file to the device.

The software should not permit erase operations on devices that are only assigned a BSDL file. This will be corrected in the next major software release.
AR# 14210
日期 09/26/2005
状态 Archive
Type 综合文章