We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 14212

*Obsolete* 4.2i iMPACT - Serial PROM generation fails if "Specify Xilinx Serial PROM Device" options are not selected


Keywords: iMPACT, PROM, generate, fail

Urgency: Standard

General Description:
When a serial PROM is created from the iMPACT GUI in any mode, in the "Specify Xilinx Serial PROM Device" window, one of the options (either "Auto-select PROM" or "Select a serial PROM") must be selected.

If neither of these options are checked, subsequent failures occur during the "Generate PROM" stage.


To avoid failure during the "Generate PROM" stage, select either "Auto-select PROM" or "Select a serial PROM" in the "Specify Xilinx Serial PROM Device" window before generating the PROM file.

This problem will be fixed in the next major software release.
AR# 14212
日期 09/26/2005
状态 Archive
Type 综合文章