UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 14306

*Obsolete* 4.1i iMPACT - "ERROR:Portability:90 - Command line error: Argument[2]...'/dev/ttya'"

描述

Keywords: impact, ttya, Project navigator, ISE, UNIX

Urgency: Standard

General Description:
After I set properties for the cable setup (e.g., the speed [19200] and the port [/dev/ttya]) in ISE (iMPACT properties), iMPACT does not start correctly. Instead, the following errors are reported:

"ERROR:iMPACT - Command line Error: unknown switch "!"

"ERROR:Portability:90 - Command line error: Argument[2] "/dev/ttya" needs to match one of these keywords:
"auto|lpt1|lpt2|lpt3|com1|com2|com3|com4|usb0|usb1|usb2|ttya|ttyb|tty00|tty01"."

However, from the ISE GUI, I can only select from a list and cannot type the option "ttya".

解决方案

This problem is fixed in the latest 4.2i Service Pack, available at:
http://support.xilinx.com/support/techsup/sw_updates
The first service pack containing this fix is 4.2i Service Pack 2.
AR# 14306
日期 12/27/2005
状态 Archive
Type 综合文章
的页面