We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 14332

4.2isp1 Timing - Tdcmino has changed between 4.2i and 4.2.01i


General Description:

I run the same NCD and PCF through 4.2i and 4.2.01i, yet the timing report shows that Tdcmino is different between the two. What can I do to fix this?


The difference is that the DCM fixed-phase shift is no longer calculated within the Tdcmino value; rather, it is accounted for as phase. This change was necessary because accounting for the fixed-phase as delay caused problems when an attempt was made to relate registers through the fixed phase -- the tool would report egregious hold violations.

Regrettably, this solution is not without its drawbacks. In this case, the PCF must be regenerated (via NGDBuild and MAP) within the new release in order to regenerate the PERIOD constraints with the proper phase relationships.

Therefore, to work around this problem, you must regenerate the implementation files through NGDBuild and MAP.

AR# 14332
日期 01/18/2010
状态 Archive
Type 综合文章