We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 14379

4.2i Virtex-II PAR - "FATAL_ERROR:Route:basrtsanity.c:244:1.8 - Process will terminate."


Keywords: Guide, modular, placer

Urgency Standard

General Description:
The Virtex-II placer is not correctly prohibiting potential placement sites that contain route-thru's. This failure results in the following error after placement:

"FATAL_ERROR:Route:basrtsanity.c:244:1.8 - Process will terminate."

NOTE: This Answer Record is only a good match for your problem if it involves a Virtex-II design that contains pre-existing routing before placement (guide, modular) and the failure occurs after placement but before routing.


This problem is fixed in the latest 4.2i Service Pack, available at:
The first service pack containing the fix is 4.2i Service Pack 2.
AR# 14379
日期 10/23/2008
状态 Archive
Type 综合文章