AR# 14542


4.1i CPLD CoolRunner XPLA3 - Pull-ups are not configured for input registers


Keywords: 4.1i, 4.2i, CPLD, CoolRunner, XPLA3, pull-up, pullup, input register

Urgency: Low

General Description:
An input pin is set to use a pull-up; however, this pin is not pulled up on the device.


This issue only affects pins that are configured as input registers.

This problem was fixed in 4.2i Service Pack 3, available at:
AR# 14542
日期 08/06/2003
状态 Archive
Type 综合文章
People Also Viewed