We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 14653

7.1i ISE - In Project Navigator, only EDIF is available as a Design Flow preference. (No synthesis flows are listed.)


Keywords: Project Navigator, ISE, synthesis, XST, Leonardo, schematic, Synplicity, ECS, EDIF, design flow, ABEL, source, EDN

Urgency: Standard

General Description:
In Project Navigator, EDIF is the only Design Flow selection available under Source -> Properties. No synthesis flows are listed.

When I add a source to my project, the only extensions allowed are: .txt, .edn, .edf, .sedif, and .ucf.


This behavior is typical for Alliance software.

To use a synthesis flow, ISE Foundation series software must be installed. (Contact your distributor to obtain Foundation software.)
AR# 14653
日期 12/11/2006
状态 Archive
Type 综合文章