UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 1493

PROFlow 3.0: About "PSFM !No resume"

Description

PROflow quits with this message and shuts down PRO flow and returns the user
to the Windows Program Mananger. The typical synario for this message is
when the PRO Capture window is open and the user starts PROsim from PROflow.

Cause: There is not enough Conventional Memory to run PROflow.

解决方案

1

Increase the Conventional Memory by loading drivers high and removing
unnecessary drivers and TSRs. You should have at least 450k (as seen from
a DOS session from Windows) to avoid any problems. Use a memory manager
like QEMM or maXmem (on the BBS within XMEM.ZIP) to free up low memory.

2

Close PRO Capture before invoking PRO Sim.

3

If the above solutions do not work, run xsimmake from DOS shell. For a list of flows with xsimmake, use -l option with xsimmake from DOS. For help on these flows, use -h option.
AR# 1493
创建日期 08/31/2007
Last Updated 10/07/2008
状态 Archive
Type 综合文章